 |
fireretardantcoatingshouston.info, Houston Flame Retardant CoatingsHotline: 800-333-9197 8am-5pm (CST) Ph: 817-740-9197 After Hours: 817-658-9197 / email: fireprod@aol.com |
Houston, Dallas, Fort Worth, Plano, Frisco, North Texas, Austin, Waco, Central Texas, Houston, San Antonio, Corpus Christi, South Texas, Abilene, Odessa, Midland, Lufkin,Amarillo, West Texas, Tyler, East Texas, Dallas, Houston metroplex,. North Dallas |
HOME | FIRE RETARDANT WOOD | CONTACT US | HOW IT WORKS |VIDEOS
FLAME SAFE PRODUCTS - FLAME SAFE COATINGS - FLAME SAFE SPRAYS
FIRE POLY™ ASTM E84 CLASS A
|
Flame Safe's FIRE POLY™ coatings are intumescent fire retardants that have been formulated and developed specifically for the wood and wood products industry. FIRE POLY™ has been tested by Underwriters Laboratories (UL) and Southwest Research Institute(SWRI), Maxim Technologies, Universal Laboratories and more.
|
|---|---|
ASTM E84 CLASS B
|
Flame Safe's WOOD SAFE (formally J.D.P. 108) is a is an aqueous based resin that is colorless, odorless, non-toxic, and environmentally friendly fire retardant for interior use - UL fire rated f.s. 35; s.g. 95 - flat finish, paintable, stainable. Long term fire retardant protection, WOOD SAFE, can be applied to any type of wood such as yellow pine, douglas fir, SPF, cedar, oak, birch, walnut, and redwood. WOOD SAFE is applied in 3 coats (330-390 sq.ft. /coat) allowing drying time between coats, with the final coverage rate of 110-130 square feet to the gallon. WOOD SAFE creates a barrier to fire. The chemical reaction, when exposed to flame , creates an intumescing action causing the surface to bubble up and thereby creating barrier between the fire and treated material. Structures under construction can be effectively made fire safe. As soon as the surface is enclosed, spray all exposed interior surfaces such as studs, trusses, subfloor, joist and interior outside walls. |
ASTM-E-108 Class B
|
Flame Safe SHINGLE SAFE™ has been tested by Western Fire Center and is classified as a Class B fire retardant coating and by Southwest Research Institute and classified as a Class C fire retardant coating that meets the ASTM-E-108 [Burning Brand, Flying Brand, Spread of Flame and Intermittent Flame Exposure] classification for wood shingle roofs. The coverage rate for SHINGLE SAFE™ fire retardant is 120 -140 sq. ft. to the gallon. Apply by spray, beginning at the ridge and working down and across the roof surface. For optimum results, to inhibit or drastically reduce the wind tunnel or blow torch effect of fire in the attic area, fire retard the underside of the roof in the attic, as well as other substrates, including blown cellulose insulation with SHINGLE SAFE™. |
|
THATCH SAFE™ 1 fire retardant coating is formulated to fire retard natural thatch, reed, bamboo, koa, cypress, and palm to comply with the ASTM E84 and the ASTM D2898 procedure. THATCH SAFE™ fire retardant will give a semi gloss appearance when applied that gradually changes back to the natural appearance.
|
FAR 25.853 A & B
|
FABRIC SAFE is a fire retardant spray on coating for natural fabrics and most synthetic and synthetic blends. FABRIC SAFE can significantly reduce the hazard of fire because of its ability to double or triple the flashpoint ofr most materials. It forms a barrier which inhibits ignition of the fire treated material and restricts the char to the immediate area exposed to flame. FABRIC SAFE is a water based, clear, non-toxic, and odorless. The coverage rate of FABRIC SAFE is 300-500 square feet per gallon depending on the type and weight of the material being fire retardant treated. In most instance FABRIC SAFE is applied with a spray applicator. A sponge can be an effective method of applying FABRIC SAFE fire retardant on wallpaper and wall coverings. All textiles/fabrics lose some of their fire retardant qualities after deep cleaning, therefor re-treatment with FABRIC SAFE is advised to achieve maximum results. Pile or high tufted carpet in particular is suitable for FABRIC SAFE fire retardant treatment after deep cleaning.
|
ASTM E162,
ASTM E662
|
PAPER SAFE is a water-based, clear, odorless, non-toxic, and environmentally friendly fire retardant coating. Applied at a rate of 300 to 500 square feet to the gallon PAPER SAFE is an excellent fire protection for holiday/seasonal paper decorations . Before applying PAPER SAFE check for color fastness. PAPER SAFE, formulated and developed specifically for the corrugated board, cardboard box and packaging industry is a fire retardant coating and penetrant. PAPER SAFE exceeds the United States Navy's fire retardant standard ASTM-E-162 (flame spread), as well as standard ASTM-E-662 (smoke generation). PAPER SAFE is an aqueous based resin that is colorless, odorless, non-toxic, and adds no appreciable weight. The National Fire Protection Association (NFPA) - 30 Standard became effective September 1, 1991, which requires that combustible liquids in plastic containers be packaged in some sort of noncombustible shipping container. NFPA-30 is only concerned with the ability of the full assembly to pass the fire requirements of the U.L. Procedure Subject 2019. Flame Safe's PAPER SAFE as a component part will assist in the passing of the "Final Assembly Package Procedure". |
Cal. Admin. Code, Title 19, Public Safety, Art.3, Sec. 1264.3, "Christmas Trees"
|
TREE SAFE is a fire retardant spray on coating primarily used for indoor Christmas trees. In addition, TREE SAFE acts as a wood preservative keeping the needles of the tree greener for a longer period of time. One quart covers up to an 8' tree. With a mist sprayer, start at the top of the tree and spray all branches and foliage. After spraying pour the remainder of the TREE SAFE into the stand reservoir mixed with water. Allow the tree to dry indoors or in a covered area. TREE SAFE is an excellent fire protection on dry grass and brush. It’s application can slow or stop the advance of the flame front caused by winds in areas of exceptionally low humidity. As a Federal Emergency Management Agency (FEMA) partner, Flame Safe offers a substantial discount to homeowners and business in high risk fire areas. |
 |
Flame Safe also manufactures fire retardant fabric products, such as it's trademarked FIREBUSTER™. The FIREBUSTER™ has been treated with a fire retardant chemical and shown in tests not to burn at temperatures exceeding 2000 degrees Fahrenheit. Tests conducted by Southwest Research Institute shows that the FIREBUSTER™ surpasses all requirements of the test procedure Cal 1237.1 by as much as 700%. Putting a FIREBUSTER™ over a fire will cut off the flow of oxygen thereby extinguishing the fire. It will eliminate the heavy smoke, while filtering the remainder. |
.jpg)
For Technical, MSDS, Testing Information go to www.flame-safe.com
HOME | FIRE RETARDANT WOOD | CONTACT US | HOW IT WORKS VIDEOS
The information contained herein is the property of Fire Prevention Technologies d/b/a Flame Safe Chemical Corporation and Flame Safe Wood Products, Inc . © 1990 Revised 8/20/2009, Revised 2012, Revised 2013